Browse all practice questions for the Lean Bronze Certification Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Lean Bronze Certification Practice Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • In a 5S program, red tagging is used to
  • What is the ultimate goal of lean?
  • What term describes the practice of a downstream process going to the upstream process to retrieve product?
  • Which term describes leveling production to smooth out volume and mix in kanban systems?
  • Which statement describes the basis of the Toyota Production System based on the material?
  • Leadership must protect the working environment and the health and safety of all employees, in order to maintain respect. What is NOT included in assuring a safe environment?
  • What is the name for an activity that is non-value added but necessary?
  • In a Lean organization, whose responsibility is safety?
  • Which of the following made Fordism unsustainable?
  • Which statement about takt time is true?
  • Sustain ensures that improvements are:
  • Time study and standardized work is based on the work of whom?
  • The amount of time it takes to complete one piece at a process step is known as
  • Who are pioneers of Just in Time techniques in Toyota?
  • Which term is described as the foundation for stability in the House of Lean?
  • A manufacturing plan with a high level of Muri indicates what about the workers?
  • What is the foundation of Toyota's House of Lean?
  • A tool used to implement a pull system is:
  • Which waste is described as the worst because it opens the door to other kinds of waste?
  • The system used for managing and ensuring the flow of production materials in a just-in-time production system is known as:
  • Which term refers to the set of actions that move a product through the essential flows, including both value-added and non-value-added steps?
  • The goal of Hoshin Kanri is
  • Which Lean process is designed to align resources and strategic goals across the organization?
  • Which of the following is the reason for the standardization of a process?
  • Which Kanban signal specifies the kind and quantity of product the downstream process may pull?
  • Which waste could be corrected by pulling demand from the customer?
  • When you identify a bottleneck, the first step should be to
  • Which statement best defines value-added work in a lean system?
  • Which statement best describes takt time?
  • For most unimproved processes, the proportion of value-added work relative to total activities is approximately:
  • Which statement about just-in-time concepts is true?
  • What is the primary focus of Kaizen?
  • A value stream is the entire sequence of work required to bring a product from what to delivery?
  • Which of the following is not considered one of the seven plus one wastes?
  • Which waste is identified as the 'Mother of all wastes' in lean thinking?
  • In evaluating Overall Equipment Effectiveness, which item is not considered in the calculation?
  • Which statement best describes standardized work?
  • Which problem-solving process is most commonly associated with Six Sigma?
  • Learning to See is widely regarded as the foundation of which lean tool?
  • The purpose of Takt time is to:
  • A visual management system in Sustain helps by:
  • Which term describes producing only what is needed, when it is needed, to avoid excess inventory?
  • Which statement best describes the purpose of a Value Stream Map in Lean management?
  • Which description best defines Autonomous Maintenance in TPM?
  • Catch ball is typically deployed in which process?
  • Batch processing creates which of the following?
  • With 960 minutes of available time, demand 200 units, and an OEE of 85%, what is the takt time?
  • In lean process analysis, which term describes unevenness in work and demand flow?
  • For a process where takt time is 50 seconds and the pitch is the product of takt time and pack-out quantity, which option correctly states the pitch when the pack-out quantity is 1?
  • Which of the following is NOT a way to describe Gemba?
  • What term describes measurements used to gauge problems, set targets, study impact of improvements, check results, and adjust?
  • What is the primary goal of continuous flow in a production system?
  • During the 5S sort phase where should we put items we don't think we need?
  • OEE is typically calculated as the product of which three components?
  • An important part of a Lean culture is people development - which of the following is NOT an example of people development?
  • Which term describes measurements used to gauge problems and guide improvement in lean systems?
  • Which activity best supports Sustain?
  • Which tool is used to drill down into the root cause by repeatedly asking 'why'?
  • What should you expect from a SMED (single minute exchange of dies) implementation?
  • Kaizen is a Japanese word meaning "change for the good", or continuous improvement. Which process best describes kaizen?
  • Which term describes a radical change in lean improvements?
  • Lead Time is the total time from order to delivery.
  • Management by walking around is most closely related to which concept?
  • What is the first step to cellularizing a production line?
  • What is described as the basis of the Toyota Production System in the provided material?
  • What is the first step when creating a value stream map?
  • Which method determines the optimal number of workers by aligning work with the line's flow?
  • Pitch equals takt time times pack-out quantity.
  • Which company created the first moving assembly line?
  • Which item is considered the 8th waste in Lean's extended framework?
  • Which lean concept is defined as automation with a human touch?
  • Kanban is a tool to support:
  • Which statement best reflects the relationship between Kaizen and Kaikaku?
  • Among the seven wastes, which is considered the worst?
  • What method supports Sustain?
  • Why did the first implementation of lean techniques by American automotive companies often fail?
  • Which tool is most appropriate for visualizing a process and identifying root causes?
  • Which of the following is NOT true about Hoshin Kanri?
  • In a lean system, who should establish production standards?
  • To sustain gains, management should:
  • Sustain metrics often include:
  • In which element is Takt Time commonly included?
  • Which statement about takt time is true?
  • When using the Ishikawa (Fishbone) Diagram, potential causes are grouped by which categories?
  • Which option is listed as a Lean waste under the concept of Knowledge Disconnect?
  • Which of the following are characteristics of craft manufacturing?
  • What is a Kaizen event typically used for?
  • Which combination is listed as an enabler to separating man from machine?
  • In lean thinking, which statement best captures the relation of stability?
  • Which theory describes the relationship between WIP, throughput, and lead time?
  • One of the foundations of the Toyota Production System is standardized work. Its purpose is to:
  • One-piece flow in Lean refers to which production approach?
  • Sustain requires that standard work be:
  • Which are the Pillars of TPS?
  • Which element is described as foundational in lean systems?
  • Making parts just in case is an example of which Lean waste?
  • The description of employees from different areas coming together to complete a task or solve a problem is described as which type of team?
  • According to lean Production Simplified, what should we do instead of blaming people for failures?
  • What term describes machines that automatically reveal problems?
  • Calculate the availability component of OEE using the data: Scheduled to run 16 hours a day, 5 days a week; Planned stop production 60 min each day for 5S activities; Lost 3 hours this week due to machine breakdowns; Lost 2 hours this week due to material shortages.
  • Which lean analytical tool helps identify the root cause of a problem?
  • Which of the following is NOT defined by Muri, Muda, Mura?
  • Which technique is used to determine the optimal number of workers by ensuring an even workload across tasks?
  • W. Edwards Deming is associated with what Lean tool or technique?
  • Which term represents the fundamental Lean concept that drives improvements by eliminating non-value-added activities?
  • Given a shift of eight hours with 20 minutes breaks, process time 1 minute, setup 15 minutes, and an interval of 60 parts, what is the capacity?
  • If work-in-process is 10 pieces and cycle time is 2.5 days, what is the throughput rate?
  • What is the primary purpose of safety stock in supply chain management?
  • Which 5S step is described by 'Keep needed items from unneeded items and eliminate the latter (Red tag area)'?
  • What is a key difference between mentoring and coaching?
  • Which Lean term refers to waste from unnecessary motion, inventory, and processing steps?
  • Which term is commonly used for a small cross-functional team formed to tackle a specific problem quickly?
  • What is the primary objective of Poka-Yoke?
  • From the ideas system perspective, which feature most supports sustained engagement?
  • A physical device that prevents an operator from installing a component in the wrong orientation is an example of which concept?
  • Which of the following is a Japanese management philosophy used to increase time between failure of a piece of machinery?
  • In the 5S methodology, which step is commonly associated with communication and training?
  • Which lean practice is specifically concerned with reducing downtime during transitions between products?
  • In Lean, what signaling mechanism triggers replenishment in a pull system?
  • Which statement about Hoshin Kanri is consistent with the material?
  • Lean techniques define value from the perspective of whom?
  • Which statement is true about the objective of Just in Time in lean practice?
  • An effective Sustain plan includes:
  • Takt time is the rate at which a product must be produced to meet customer demand.
  • In its purest form, when items are processed and moved directly from one process to the next one piece at a time, it is known as:
  • Which tool is described as helping to understand the different value streams in lean systems?
  • The heart and soul of a lean organization according to Masaaki Imai (Gemba Kaizen) is what?
  • For a single 8-hour shift with 20 minutes of breaks and a daily demand of 230 units, takt time is:
  • Sustain is primarily about preventing backsliding by:
  • In 5S, the Red Tag area is used to identify items that are
  • Which 5S term corresponds to standardizing processes?
  • If takt time is 30 seconds and a process step has a cycle time of 22 seconds, how long is the waiting time per cycle at that step?
  • Which practice best supports reducing operator-to-operator variation?
  • Which of the following is a direct consequence of batch processing in manufacturing?
  • In Sustain, visual cues provide:
  • Quality at the source is a principle where quality is measured at every level of a process, not just at the endpoint. What would quality at the source impact?
  • Which 5S step corresponds to "Set in order"?
  • Which term describes incremental continuous improvement?
  • What are the three elements of standard work in lean production?
  • What is the primary purpose of mapping the value stream?
  • Which maintenance philosophy aims to increase time between failures?
  • The takt time number means:
  • Which is NOT an element of an effective idea-management system?
  • Which statement correctly describes the relationship between process stability and process capability?
  • Lean manufacturing is derived from the TPS; the fundamental concept behind lean manufacturing is the elimination of?
  • In a Sustain-focused review, you should examine:
  • To improve end-to-end flow, which should be identified and mapped?
  • Takt time refers to:
  • The amount of stock kept on hand to compensate for variation in supplier lead time and upstream processes is known as:
  • Which of the following is not typically listed as a Lean waste?
  • Hour by hour charts are an example of which lean concept?
  • In 5S, what is the primary objective of Sustain?
  • If a multi-step manufacturing process has its capacity limited by a single workstation, which action most directly increases overall capacity?
  • Given a takt time of 180 seconds and cycle times of 160s (Cutting), 190s (Deburring), 192s (Inspecting), and 194s (Packing), which process is the bottleneck?
  • Gemba in lean thinking refers to the what?
  • Standardizing and stabilizing the process are necessary steps:
  • Which PDCA phase is used to assess results after an improvement cycle?
  • Which is an enabler of a lean culture?
  • A commonality between sports and work is the ongoing need for:
  • Which principle used in lean would allow an employee to have autonomation?
  • Which Lean concept is used to level production to match demand?
  • In lean Manufacturing, which term describes fluctuations in process performance (uneven)?
  • If Sustain is not practiced, gains tend to:
  • In a production line, pulling a cable to stop the line is an example of which visual control tool?
  • In 5S, the activity 'Sort' primarily focuses on:
  • Which of the following is NOT a core element of the TPS?
  • In value stream mapping, who defines value at the outset?
  • What is the purpose of value stream performance analysis?
  • In a production line, a common sign of a bottleneck is
  • What would a project team do during the 4th step of a 5S implementation? (self-discipline is last of 5s)
  • Which 5S step is described by 'Keep needed items in the correct place to allow for easy and immediate retrieval'?
  • What is the first step to identify waste on a selected production line according to lean principles?
  • Which Lean tool is designed to prevent human errors from causing defects?
  • Which of the following is considered value-added work?
  • With a takt time of 180 seconds and cycle times of 160s, 190s, 192s, and 194s, what is the greatest waiting time?
  • Quick changeover is a lean principle used to:
  • Which practice is least associated with Sustain?
  • Which of the following is not a lean waste?
  • Which diagram, when eliminating barriers to flow, uses graphical symbols to depict the nature and flow of steps within a process?
  • Which 5S step is described by 'Method by which sort, straighten, shine is made habitual'?
  • Which term describes all actions required to move a product through the main flows?
  • Which 5S step is described by 'Keep workplace neat and clean'?
  • Sustain includes establishing systems for:
  • If Availability is 100%, Performance is 100%, and OEE is 90%, what is the Value Stream Quality percentage?
  • Little's Law states that WIP equals what combination of Throughput and Lead Time?
  • Which diagram is commonly used to analyze the flow of people and materials in a facility?
  • Which term describes work performed by a person?
  • In TPM, which is an example of a hidden failure?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy